Free online course
ProwadziControlByte
Free Siemens S7-1200 PLC Programming Course - Ladder Logic
A free entry-level course in Siemens S7-1200 PLC programming in TIA Portal. You install TIA Portal, write your first program in Ladder logic, add an HMI panel and then program a pneumatic...
ProwadziControlByte
What you will learn
- Install Siemens TIA Portal and create your first project
- Write programs in Ladder logic for the S7-1200
- Add an HMI panel and build a simple visualization
- Declare inputs and outputs and analyse a control system
- Program latching and sequential operation of pneumatic cylinders
Course curriculum
14 lessons · ok. 1 hour · 4 modules
1. Getting started with TIA Portal4 lessons
- Welcome to the course 2:20
- Download and install Siemens TIA Portal 6:02
- Your first program in Ladder logic 10:56
- Add an HMI panel and create a visualization 9:35
2. Ladder logic basics4 lessons
- Download and start the project template 5:19
- Declare inputs and outputs and analyse the control system 18:39
- Ladder logic editor and libraries 13:15
- Basic Boolean operations: AND, OR 12:53
3. Pneumatics and latching3 lessons
- How a pneumatic system works 4:23
- Bit logic operations: NC contact 4:28
- Self-holding (latching) coil 7:18
4. Sequences3 lessons
- Sequential operation of a pneumatic cylinder 8:16
- Sequence of two cylinders - step by step 5:13
- Homework solution 5:23
O kursie
A free entry-level course in Siemens S7-1200 PLC programming in TIA Portal. You install TIA Portal, write your first program in Ladder logic, add an HMI panel and then program a pneumatic system: latching, NC contacts and a sequence of two cylinders - with a homework task and its solution.
Ready for more? Continue with the Siemens S7-1200/S7-1500 PLC Programming Course.
Who it is for
- Beginners who want to become PLC programmers
- Electricians moving into automation
- Students and technicians who want to learn Siemens TIA Portal
Wymagania
- A Windows PC that can run Siemens TIA Portal
- No PLC hardware needed - programs are tested in the simulator
Start for free today
Create a free account and watch the first lesson right away.
Courses
See also
Modbus, Profinet, OPC UA Communication Training
99,00 €400,00 €
Basic PLC Structured Text Programming Course in CODESYS
99,00 €400,00 €
Servo Drives and VFDs Motion Control Programming for PLCs Training
249,00 €400,00 €
Safety Programming for Siemens PLCs
149,00 €400,00 €
